Titanium bolts M14×52mm Lug Bolt Sets for Ferrari cars, Pitch 1.5mm, by Tianswer

A long M14 × 1.5 wheel bolt for a carefully matched wheel installation. This Tianswer bolt is listed in Grade 5 Ti-6Al-4V (TC4) titanium alloy with a 52 mm length and internal hex drive. If you are shopping for Ferrari wheel hardware, compare the original fastener and wheel-seat geometry before choosing a replacement; make and model alone are not enough to establish fit.

Sold in sets of 5 (1 wheel / spare), 10 (front or rear axle / 2 wheels), and 20 (full car / 4 wheels). Select your finish and package size.

Package Options & Vehicle Axle Configurations

Ferrari and high-performance European platforms feature a standard 5-lug bolt circle (5 bolts per wheel). To match your maintenance or tuning setup, choose from three tailored package quantities:

• Set of 5 (1 Wheel / Spare): Complete 5-piece hardware set for one wheel. Perfect for single wheel replacement, spare tire mounting, or test-fitting thread engagement.
• Set of 10 (Front or Rear Axle / 2 Wheels): Contains 10 lug bolts to outfit one complete axle. Ideal when upgrading front or rear brake kits, or when running staggered wheel setups.
• Set of 20 (Full Car / 4 Wheels): Complete 20-piece vehicle set to replace all factory wheel bolts across all four corners for maximum rotating unsprung mass reduction.

Listed specifications

• Material: Grade 5 Ti-6Al-4V (TC4) titanium alloy
• Thread: M14 × 1.5 mm Metric Pitch
• Under-Head Shank Length: 52 mm
• Drive: Internal Hex Drive
• Available Finishes: Natural Titanium, PVD Vacuum-Coated Gold, Rainbow, Burn Blue, and Deep Black

What to verify before ordering

Compare thread pitch, the manufacturer's method of measuring bolt length, wheel-seat shape and contact area, wheel thickness, hub thread engagement and head/drive clearance against the original assembly. The correct seat is essential to wheel retention; a matching M14 thread and 52 mm length alone do not establish compatibility. Do not assume this bolt fits every Ferrari wheel or aftermarket wheel.

Installation note

Wheel retention is safety-critical. Follow the vehicle and wheel manufacturers' approved fastener specification, lubrication policy and torque procedure. Have a qualified installer verify fit and secure seating before driving. No universal torque, weight saving, forged-head process or model-specific approval is claimed here. To learn more about rotational weight savings and hub fastener safety, read our Unsprung Weight & Fastener Performance Guide.

FAQ

Will this fit my Ferrari? The listing identifies M14 × 1.5 and 52 mm, but those measurements alone cannot confirm fitment. Check the original bolt's wheel-seat profile and installation requirements with your vehicle or wheel manufacturer.